|
Product Details:
|
| Material: | PC, PA6-GF30, SI | Power Supply: | 24V DC ±10% |
|---|---|---|---|
| Set-point Signal: | 4-20mA | Ambient Temp.: | 0 - 70℃ |
| Supply Pressure: | 0.3-0.7 MPa, Specific Values Depending On The Actuator | Flow: | 17L/min (Sup=0.6MPa)；58L/min (Sup=0.6MPa, Only Single-acting) |
| High Light: | 4-20mA Intelligent Valve Positioner,Autotune Intelligent Valve Positioner,PC Intelligent Valve Positioner |
||
1. Product description
1500 series intelligent electropn-eumatic valve positioner is designed for integral pneumatic control valve, particularly suitable for angle seat valves and diaph-ragm valves.
The product is easy to operate. It can easily be operated via the keypad.
The positioner adjusts the valve position quickly and accurately through detecting the position sensor signal.
2. Technical Data
| Material | PC,PA6-GF30,SI |
| Power supply | 24V DC ±10% |
| Set-point signal | 4 - 20 mA |
| Input resistance for set-point signal | 120Ω |
| Ambient temperature | 0 - 70° |
| Pneumatic connection | Plug-in hose connector G1/4 (internal Φ6mm) |
| Electrical connection | M12 3-pins B-code (cable Φ 4-6mm); M12 4-pins D-code (cable Φ4-6mm) |
| Supply pressure | 3-7 bar, specific values depending on the actuator |
| Air flow rate | 17 L/min (Sup=0.6MPa); 58L/min (Sup=0.6MPa) |
| Stroke control range | Linear 5-50mm; Rotary 90° |
| Installation | As required, preferably with actuator in upright position, screw |
| Protection class | IP66 |
| Power consumption | ＜5W |
3. Product type selection
Remark:
In the air flow rate option, code Q1 is suggested to match the actuator of 40-100 mm internal gas chamber diameter, code Q2 is suggested to match the actuator of 125-160 mm internal gas chamber diameter. Code Q2 is only used for single-acting actuator, and only in Freeze state when power-off. The air flow rates for code Q1 and Q2 are under the condition of 0.6Mpa input pressure.
In the valve max stroke option, AT actuator range for code S4 is AT50~AT125. For other actuator models, please consult our company. It is no need to select the thread type option for code S4.
Power off state for single-acting option is Safe by default.
4. Structure
| 1 | Protective cover |
| 2 | Main body casing |
| 3 | Electrical connection |
| 4 | Pneumatic connection |
| 5 | Actuator connection |
5. Features
6. Dimensions
Contact Person: Ronald Chen
