|
Product Details:
|
| Set-point Signal: | 0/4-20mA DC Or 0-5/10 V | Ambient Temp.: | 0 - 70℃ |
|---|---|---|---|
| Input Resistance For Set-point Signal: | 240Ω At 0/4-20mA; 21KΩ At 0-5/10V | Pneumatical Connection: | G1/4 Plug-in Hose Connector(internal Φ6mm) |
| Explosion-Proof Class: | Ex NA IIC T4 | Thread Type: | G1/4、M16*1、M22*1.5、M26*1.5 |
| High Light: | Explosion Proof Control Valve Positioner,70℃ Control Valve Positioner,LCD Control Valve Positioner |
||
1600 Series Top Thread Mounted Smart Electro-pneumatic Valve Positioner with Explosion Proof
1. Product Description
1600 series intelligent electro-pneumatic valve positioner is designed for integral pneumatic control valve, particularly suitable for angle seat valves and diaphragm valves.
The product is easy to operate and has rich software functions. It can easily be operated via the LCD and keypad.
The positioner adjusts the valve position quickly and accurately through detecting the position sensor signal.
2. Basic advantages
3.Technical Datas
| Material | PC,PA6-GF30,Stainless Steel,SI |
| Power supply | 24V DC ±10% |
| Set-point signal | 0/4-20mA or 0-5/10 V |
|
Control medium Dust concentration Particle density Pressure condensation point Oil concentration |
Neutral gases, air DIN ISO 8573-1 Class 5 (<40μm particle size) Class 5 (<10mg/m3) Cass 3 (<-20°C) Class 5 (<25mg/m3) |
| Ambient Temperature | 0-70°C |
| Pneumatic Connection | Plug-in hose connector G1/4(internal Φ6mm) |
| Electrical Connection |
M12 3-pins B-coded(cable ø 4-6mm) M12 4-pins D-coded(cable ø 4-6mm) M12 5-pins A-coded(cable ø 4-6mm) |
| Supply Pressure | 3~7 bar, specific values depending on the actuator |
| Air Flow Rate | 17 L/min, 58 L/min(only single-acting) |
| Stroke Control Range |
Linear 5-50mm Rotary 90° |
| Installation | As required, Preferably with actuator in upright position, Screw. |
| Protection Class | IP65 |
| Power Consumption | <5W |
| Explosion Proof | Ex nA IIC T4 |
4. Structure
| 1 | LCD and key panel |
|---|---|
| 2 | Stainless steel body casing |
| 3 | Main body casing |
| 4 | Electrical connection |
| 5 | Pneumatic connection |
| 6 | Actuator connection |
5. Product type selection
Remark:
In the air flow rate option, code Q1 is suggested to match the actuator of 40-100 mm internal gas chamber diameter, code Q2 is suggested to match the actuator of 125-160 mm internal gas chamber diameter. Code Q2 is only used for single-acting actuator, and only in Freeze state when power-off. The air flow rates for code Q1 and Q2 are under the condition of 0.6Mpa input pressure.
In the valve max stroke option, AT actuator range for code S4 is AT50~AT125. For other actuator models, please consult our company. It is no need to select the thread type option for code S4.
Power off state for single-acting option is Safe by default.
6. Dimensions
Contact Person: Ronald Chen
