|
Product Details:
|
| Pressure Range: | 0.005 - 0.1MPa; 0.005 - 0.5MPa; 0.005 - 0.9MPa | Supply Voltage: | Voltage: DC 24V±10%; Current-mode: Below 0.12A |
|---|---|---|---|
| Input Signal: | Current-mode: DC 4-20mA; Voltage-mode: DC 0-5V, DC 0-10V | Input Resistance: | Current-mode: Below 250Ω; Voltage-mode: About 6.5KΩ |
| Hysteresis: | 0.5% F.S. | Repeatability: | 0.5% F.S. |
| High Light: | 4-20mA Electropneumatic Regulator,1.0MPa Electropneumatic Regulator |
||
1. Product Description
IPR 2010 series regulators support proportional control of the output pressure with an electrical input signal. Increasing the pilot pressure by increasing the input signal operating a diaphragm controlling air between the supply pressure and output ports. The pressure of output port will continue to increase until the feedback from the pressure sensor shows the output pressure to be proportional to the input signal.
2.Technical Datas
| Type selection | IPR 2010,2020,2030 |
| Min supply pressure | +0.1MPa |
| Max supply pressure | 0.2MPa /1.0MPa |
| Pressure range |
0.005~0.1MPa 0.005~0.5MPa 0.005~0.9MPa |
| Supply voltage |
Current: Below 0.12A Voltage:DC:24V ±10% |
| Input signal |
Voltage-mode:DC0-5V, DC0~10V Current-mode:DC4~20mA |
| Input resistance |
Voltage-mode: about 6.5KΩ Current-mode: below 250Ω |
| Output signal |
DC4~20mA load resistance: below 250Ω DC1~5V load resistance:above 1KΩ Output accuracy : within 6% |
| Linear | 1%F.S. |
| Hysteresis | 0.5%F.S. |
| Repeatability | 0.5%F.S. |
| Temperature characteristic | 2%F.S. |
| Pressure display |
2%F.S. (Accuracy) 1/1000(Graduation) |
| Ambient and Fluid Temperature | 0~50℃ |
| Protection level | IP65 |
3. Features
4. Out pressure/ Signal Input
5. Flow Characteristics
6. Type Selection
Note: POWERFLOW reserves the right to change specifications without notification.
Contact Person: Ronald Chen
