|
Product Details:
|
| Supply Pressure: | 3~7 Bar, Specific Values Depending On The Actuator | Air Flow Rate: | 17 L/min(Sup=0.6Mpa); 58 L/min(Sup=0.6Mpa ,only Single-acting) |
|---|---|---|---|
| Stroke Control Range: | Linear 5-50mm; Rotary 90° | Protection Class: | IP67 |
| Feedback Signal: | 4-20mA | Feedback: | Optional With 4-20mA |
| High Light: | integral Intelligent Valve Positioner,IP67 Intelligent Valve Positioner,7 bar Intelligent Valve Positioner |
||
1. Product description
1500 series intelligent electropn-eumatic valve positioner is designed for integral pneumatic control valve, particularly suitable for angle seat valves and diaph-ragm valves.
The product is easy to operate. It can easily be operated via the keypad.
The positioner adjusts the valve position quickly and accurately through detecting the position sensor signal.
2. Technical Data
| Material | PC,PA6-GF30,SI |
| Power supply | 24V DC ±10% |
| Set-point signal | 4 - 20 mA |
| Input resistance for set-point signal | 120Ω |
| Ambient temperature | 0 - 70° |
| Pneumatic connection | Plug-in hose connector G1/4 (internal Φ6mm) |
| Electrical connection | M12 3-pins B-code (cable Φ 4-6mm); M12 4-pins D-code (cable Φ4-6mm) |
| Supply pressure | 3-7 bar, specific values depending on the actuator |
| Air flow rate | 17 L/min (Sup=0.6MPa); 58L/min (Sup=0.6MPa) |
| Stroke control range | Linear 5-50mm; Rotary 90° |
| Installation | As required, preferably with actuator in upright position, screw |
| Protection class | IP66 |
| Power consumption | ＜5W |
3. Product type selection
4. Dimensions
5. Electrical connections and pneumatic connections
| X2(Optional) | ||
|---|---|---|
| Pin | Description | Signal type |
| 1 | Analogue signal output + | 4 - 20mA |
| 3 | Analogue signal output GND | GND |
| 4 | NC | NULL |
| X3 | ||
|---|---|---|
| Pin | Description | Signal type |
| 1 | Power supply + | +24 V |
| 2 | Power supply GND | GND |
| 3 | Set signal input + | 4 - 20 mA |
| 4 | Set signal input GND | GND |
| P | Air supply enter (built-in filter, filter size 5 μm) |
| R | Air exhaust |
| C | Check valve |
| A1 | Pilot air outlet 1 |
| A2 | Pilot air outlet 2 |
6. Schematic diagram
Contact Person: Ronald Chen
