|
Product Details:
|
| Set-point Signal: | 4-20mA | Ambient Temp.: | 0-70° |
|---|---|---|---|
| Supply Pressure: | 3~7 Bar, Specific Values Depending On The Actuator | Air Flow Rate: | 17 L/min(Sup=0.6Mpa); 58 L/min(Sup=0.6Mpa ,only Single-acting) |
| Power Consumption: | ＜5W | Feedback Signal: | 4-20mA |
| High Light: | 4-20mA Ball Valve Positioner,Compact Intelligent Valve Positioner,Compact Ball Valve Positioner |
||
1. Product description
1500 Series Intelligent Electro-pneumatic Valve Compact positioner positioner for integrated mounting on pneumatically operated process valves. Remote setpoint adjustment via a 4 - 20 mA signal. Simple installation through autotune function. The valve position indication is shown through LED components. As an option a 4-20mA feedback signal can be integrated.
2. Technical Data
| Material | PC,PA6-GF30,SI |
| Power supply | 24V DC ±10% |
| Set-point signal | 4 - 20 mA |
| Input resistance for set-point signal | 120Ω |
| Ambient temperature | 0 - 70° |
| Pneumatic connection | Plug-in hose connector G1/4 (internal Φ6mm) |
| Electrical connection | M12 3-pins B-code (cable Φ 4-6mm); M12 4-pins D-code (cable Φ4-6mm) |
| Supply pressure | 3-7 bar, specific values depending on the actuator |
| Air flow rate | 17 L/min (Sup=0.6MPa); 58L/min (Sup=0.6MPa) |
| Stroke control range | Linear 5-50mm; Rotary 90° |
| Installation | As required, preferably with actuator in upright position, screw |
| Protection class | IP66 |
| Power consumption | ＜5W |
3. Product type selection
4. Interface angle adjustment
The angle can be adjusted between the positioner and the valve. If need to adjust the interface angle, relaxing the hexagon screw in place A first. Then adjusting the angle clockwise or counter-clockwise in 180°range. After adjusting the angle, locking the angle by the hexagon screw.
5. Electrical connections and pneumatic connections
| X2(Optional) | ||
|---|---|---|
| Pin | Description | Signal type |
| 1 | Analogue signal output + | 4 - 20mA |
| 3 | Analogue signal output GND | GND |
| 4 | NC | NULL |
| X3 | ||
|---|---|---|
| Pin | Description | Signal type |
| 1 | Power supply + | +24 V |
| 2 | Power supply GND | GND |
| 3 | Set signal input + | 4 - 20 mA |
| 4 | Set signal input GND | GND |
| P | Air supply enter (built-in filter, filter size 5 μm) |
| R | Air exhaust |
| C | Check valve |
| A1 | Pilot air outlet 1 |
| A2 | Pilot air outlet 2 |
6. Additional software functions
Contact Person: Ronald Chen
