Product Details:
|
Power Supply: | 24V DC±10% | Set-point Signal: | 0/4-20mA |
---|---|---|---|
Material: | PC、SI、PA6-GF30 | Stroke Control Range: | Linear 5-30mm |
Electrical Connection: | M12 2-pins B-coded(cable Φ 4-6mm); M12 4-pins D-coded(cable Φ 4-6mm) | Installation: | As Required, Preferably With Actuator In Upright Position, Screw |
High Light: | Electro Pneumatic Linear Positioner,Intelligent Pneumatic Linear Positioner,OLED Pneumatic Linear Positioner |
1. Product Description
The 1880 valve positioner is a full feature electro-pneumatic positioner designed to work in general industrial applications. This positioner can work inherently with single-acting linear control valves. It provides self-calibration and automatic adaptions to the valve and actuator being controlled. The travel range of 1880 positioner can be 5-30mm.
2.Technical Datas
Material | PC,PA6-GF30,SI |
Power supply | 24V DC ±10% |
Set-point signal | 0/4-20mA |
Control medium Dust concentration Particle density Pressure condensation point Oil concentration |
Neutral gases, air DIN ISO 8573-1 Class 5 (<40μm particle size) Class 5 (<10mg/m3) Cass 3 (<-20°C) Class 5 (<25mg/m3) |
Ambient Temperature | 0-70°C |
Pneumatic Connection | Plug-in hose connector G1/4(internal Φ6mm) |
Electrical Connection |
M12 3-pins B-coded(cable ø 4-6mm) M12 4-pins D-coded(cable ø 4-6mm) |
Supply Pressure | 3~7 bar, specific values depending on the actuator |
Air Flow Rate | 17 L/min |
Stroke Control Range |
Linear 5-30mm |
Installation | As required, Preferably with actuator in upright position, Screw. |
Protection Class | IP66 |
Power Consumption | <5W |
Explosion Proof | Ex nA IIC T4 |
3. Product type selection
Remark:
The product is only used for single-acting line stroke actuator. It is suggested to match the actuator of 40-100 mm internal gas chamber diameter.
4. Features
5. Dimensions
6. Structure
Contact Person: Ronald Chen