|
Product Details:
|
| Output Signal: | DC 1-5V Load Resistance: Above 1KΩ； DC 4-20mA Load Resistance: Below 250Ω； Output Accuracy: Within 6% | Linear: | 1% F.S. |
|---|---|---|---|
| Hysteresis: | 0.5% F.S. | Repeatability: | 0.5% F.S. |
| Ambient And Fluid Temperature: | 0 - 50℃ | Temperature Characteristic: | 2% F.S. |
| High Light: | G1/2 Thread Pneumatic Regulator,G1/2 Thread Electropneumatic Regulator,IP65 Pneumatic Regulator |
||
1. Product Description
IPR 2020 series regulators allow proportional control of the regulators output pressure with an electrical input signal. Increasing the input signal will increase the pilot pressure operating a diaphragm controlling air between the supply and output pressure ports. The pressure at the output port will continue to rise until the feedback from the pressure sensor shows the output pressure to be proportional to the input signal.
2.Technical Datas
| Type selection | IPR 2010,2020,2030 |
| Min supply pressure | +0.1MPa |
| Max supply pressure | 0.2MPa /1.0MPa |
| Pressure range |
0.005~0.1MPa 0.005~0.5MPa 0.005~0.9MPa |
| Supply voltage |
Voltage:DC:24V ±10% Current: Below 0.12A |
| Input signal |
Current-mode:DC4~20mA Voltage-mode:DC0-5V, DC0~10V |
| Input resistance |
Current-mode: below 250Ω Voltage-mode: about 6.5KΩ |
| Output signal |
DC1~5V load resistance:above 1KΩ DC4~20mA load resistance: below 250Ω Output accuracy : within 6% |
| Linear | 1%F.S. |
| Hysteresis | 0.5%F.S. |
| Repeatability | 0.5%F.S. |
| Temperature characteristic | 2%F.S. |
| Pressure display |
2%F.S. (Accuracy) 1/1000(Graduation) |
| Ambient and Fluid Temperature | 0~50℃ |
| Protection level | IP65 |
3. Out pressure/ Signal Input
4. Dimensions
5. Electrical and pneumatic connections
| No. | Description |
|---|---|
| 1 | V+ (Brown) |
| 2 | In (White) |
| 3 | V- (Blue) |
| 4 | Out (Black) |
| 5 | Down Button |
| 6 | Set Button |
| 7 | Up Button |
| 8 | Pneumatic Inlet |
| 9 | Pneumatic Outlet |
| 10 | Pneumatic Exhaust |
6. Type Selection
Note: POWERFLOW reserves the right to change specifications without notification.
Contact Person: Ronald Chen
