Home ProductsDigital Valve Positioner

Electro Pneumatic Digital Valve Positioner

Certification
China POWERFLOW CONTROL CO,. LTD. certification
China POWERFLOW CONTROL CO,. LTD. certification
I'm Online Chat Now

Electro Pneumatic Digital Valve Positioner

Electro Pneumatic Digital Valve Positioner
Electro Pneumatic Digital Valve Positioner

Large Image :  Electro Pneumatic Digital Valve Positioner

Product Details:
Place of Origin: CHINA
Brand Name: POWERFLOW
Certification: ISO9001. CE. Nepsi. ROHS
Model Number: 1880
Payment & Shipping Terms:
Minimum Order Quantity: 1 Nos
Price: Quotation Offered by Email.
Packaging Details: CTN, 25*21*16CM
Delivery Time: 10-15 Days
Payment Terms: T/T
Supply Ability: 50Nos/Week for every single Customer.

Electro Pneumatic Digital Valve Positioner

Description
Ambient Temp: 0 - 70℃ Stroke Control Range: Linear 5-30mm
Air Flow Rate: 17 L/min (Sup=0.6MPa) Thread Type: G1/4、M16*1、M22*1.5、M26*1.5
Supply Pressure: 3 - 7 Bar, Specific Values Depending On The Actuator Electrical Connection: M12 2-pins B-coded(cable Φ 4-6mm); M12 4-pins D-coded(cable Φ 4-6mm)
High Light:

Diaphragm Digital Valve Positioner

,

Explosion Proof Digital Valve Positioner

,

Electro pneumatic Digital Valve Positioner

1880 Series Explosion Proof Intelligent Electro-pneumatic Valve positioner for Diaphragm Valves

​1. Product Description


The 1880 Series Smart valve positioner receives a 4-20 mA current signal from the controller or control system, converts it into a gas signal through the processor, controls the valve opening, and cooperates with the valve adjustment cone to achieve fast and accurate flow regulation of the valve.

 

​2.Technical Datas


 Material  PC,PA6-GF30,SI
 Power supply  24V DC ±10%
 Set-point signal  0/4-20mA

 Control medium

 Dust concentration

 Particle density

 Pressure condensation point

 Oil concentration

 Neutral gases, air DIN ISO 8573-1

 Class 5 (<40μm particle size)

 Class 5 (<10mg/m3)

 Cass 3 (<-20°C)

 Class 5 (<25mg/m3)

 Ambient Temperature  0-70°C
 Pneumatic Connection  Plug-in hose connector G1/4(internal Φ6mm)
 Electrical Connection

 M12 3-pins B-coded(cable ø 4-6mm)

 M12 4-pins D-coded(cable ø 4-6mm)

 Supply Pressure  3~7 bar, specific values depending on the   actuator
 Air Flow Rate  17 L/min
 Stroke Control Range

 Linear 5-30mm

 Installation  As required, Preferably with actuator in upright   position, Screw.
 Protection Class  IP66
 Power Consumption  <5W
 Explosion Proof  Ex nA IIC T4

 

3. Product type selection


Electro Pneumatic Digital Valve Positioner 0

Remark:

The product is only used for single-acting line stroke actuator. It is suggested to match the actuator of 40-100 mm internal gas chamber diameter.

 

4. Dimensions


Electro Pneumatic Digital Valve Positioner 1

5. Interface angle adjustment


The angle can be adjusted between the positioner and the valve. If need to adjust the interface angle, rotate the main body casing clockwise or counter-clockwise in 180°range.

Electro Pneumatic Digital Valve Positioner 2

 

6. Additional software functions


  • Selection of the transfer characteristic between set-point value and stroke
  • Sealing function for position controller
  • Effective sense of direction between input signal and set-point value
  • Limit of the mechanical stroke range
  • Setting for control parameters
  • Safety position setting for the position controller
  • Configuration of signal level fault detection
  • Configuration of the outputs
  • Calibrating the control parameters
  • Setting for manual control rate
  • Code protection

Contact Details
POWERFLOW CONTROL CO,. LTD.

Contact Person: Ronald Chen

Send your inquiry directly to us (0 / 3000)