Home ProductsControl Valve Positioner

Electro Pneumatic Control Valve Positioner

China POWERFLOW CONTROL CO,. LTD. certification
China POWERFLOW CONTROL CO,. LTD. certification
I'm Online Chat Now

Electro Pneumatic Control Valve Positioner

Electro Pneumatic Control Valve Positioner
Electro Pneumatic Control Valve Positioner

Large Image :  Electro Pneumatic Control Valve Positioner

Product Details:
Place of Origin: CHINA
Certification: ISO9001. CE. Nepsi
Model Number: 1600
Payment & Shipping Terms:
Minimum Order Quantity: 1 Nos
Price: Quotation Offered by Email.
Packaging Details: CTN, 30*18*17CM
Delivery Time: 10-15 Days
Payment Terms: T/T
Supply Ability: 50Nos/Week for every single Customer.

Electro Pneumatic Control Valve Positioner

Input Resistance For Set-point Signal: 240Ω At 0/4-20mA, 21KΩ At 0-5/10V Stroke Control Range: Linear 5-50mm; Rotary 0-90°
Pnuematic Connection: G1/4 Plug-in Hose Connector (internal Φ6mm) Electrical Connection: M12 2-pins B-coded(cable Φ 4-6mm); M12 4-pins D-coded(cable Φ 4-6mm); M12 5-pins A-coded (cable Φ 4-6mm)
Ambient Temp: 0 - 70℃ Protection Class: IP66
High Light:

Electro Pneumatic Control Valve Positioner


Linear Control Valve Positioner


Rotary Control Valve Positioner

1600 Series IP66 Protection Class Smart Electro-pneumatic Valve Positioner with Feedback


1. Product Description

1600 series intelligent electro-pneumatic valve positioner is designed for integral pneumatic control valve, particularly suitable for angle seat valves and diaphragm valves.

The product is easy to operate and has rich software functions. It can easily be operated via the LCD and keypad.

The positioner adjusts the valve position quickly and accurately through detecting the position sensor signal.


2. Basic advantages

  • Compact stainless steel design
  • Electrical waterproof connectors
  • LCD with backlight
  • Easy to start-up
  • Rich additional software functions​

3.Technical Datas

 Material  PC,PA6-GF30,Stainless Steel,SI
 Power supply  24V DC ±10%
 Set-point signal  0/4-20mA or 0-5/10 V
 Input resistance for set-point   signal  240Ω at 0/4-20mA, 21KΩ at 0-5/10V

 Control medium

 Dust concentration

 Particle density

 Pressure condensation point

 Oil concentration

 Neutral gases, air DIN ISO 8573-1

 Class 5 (<40μm particle size)

 Class 5 (<10mg/m3)

 Cass 3 (<-20°C)

 Class 5 (<25mg/m3)

 Ambient Temperature  0-70°C
 Pneumatic Connection  Plug-in hose connector G1/4(internal Φ6mm)
 Electrical Connection

 M12 3-pins B-coded(cable ø 4-6mm)

 M12 4-pins D-coded(cable ø 4-6mm)

 M12 5-pins A-coded(cable ø 4-6mm)

 Supply Pressure  3~7 bar, specific values depending on the   actuator
 Air Flow Rate  17 L/min, 58 L/min(only single-acting)
 Stroke Control Range

 Linear 5-50mm

 Rotary 90°

 Installation  As required, Preferably with actuator in upright   position, Screw.
 Protection Class  IP65
 Power Consumption  <5W
 Explosion Proof  Ex nA IIC T4


4. Additional software functions

  • Selection of the transfer characteristic between set-point value and stroke
  • Sealing function for position controller
  • Effective sense of direction between input signal and set-point value
  • Limit of the machanical stroke range
  • Setting for control parameters
  • Safety position setting for the position controller
  • Configuration of signal level fault detection
  • Activating of the binary outputs
  • Configuration of the outputs
  • Calibrating the control parameters
  • Setting for manual control rate
  • Code protection


5. Product type selection

Electro Pneumatic Control Valve Positioner 0


In the air flow rate option, code Q1 is suggested to match the actuator of 40-100 mm internal gas chamber diameter, code Q2 is suggested to match the actuator of 125-160 mm internal gas chamber diameter. Code Q2 is only used for single-acting actuator, and only in Freeze state when power-off. The air flow rates for code Q1 and Q2 are under the condition of 0.6Mpa input pressure.

In the valve max stroke option, AT actuator range for code S4 is AT50~AT125. For other actuator models, please consult our company. It is no need to select the thread type option for code S4.

Power off state for single-acting option is Safe by default.


6. Schematic diagram

Electro Pneumatic Control Valve Positioner 1

Contact Details

Contact Person: Ronald Chen

Send your inquiry directly to us (0 / 3000)