|
Product Details:
|
| Set-point Signal: | 4 - 20mA | Ambient Temp.: | 0-70° |
|---|---|---|---|
| Supply Pressure: | 3~7 Bar, Specific Values Depending On The Actuator | Air Flow Rate: | 17 L/min(Sup=0.6Mpa); 58 L/min(Sup=0.6Mpa ,only Single-acting) |
| Installation: | As Required, Preferably With Actuator In Upright Position, Screw | Thread Type: | G1/4、M16*1、M22*1.5、M26*1.5 |
| High Light: | Thread Intelligent Valve Positioner,Thread Pneumatic Valve Positioner,Thread electric valve positioner |
||
1. Product description
1500 series smart valve positioner can be mounted on the pneumatic actuator as a control device for valve opening. According to a 4 to 20mA electric input signal from a higher-level control system or a control device to control air intake and exhaust of the pneumatic actuators to control the valve position.
2. Technical Data
| Material | PC,PA6-GF30,SI |
| Power supply | 24V DC ±10% |
| Set-point signal | 4 - 20 mA |
| Input resistance for set-point signal | 120Ω |
| Ambient temperature | 0 - 70° |
| Pneumatic connection | Plug-in hose connector G1/4 (internal Φ6mm) |
| Electrical connection | M12 3-pins B-code (cable Φ 4-6mm); M12 4-pins D-code (cable Φ4-6mm) |
| Supply pressure | 3-7 bar, specific values depending on the actuator |
| Air flow rate | 17 L/min (Sup=0.6MPa); 58L/min (Sup=0.6MPa) |
| Stroke control range | Linear 5-50mm; Rotary 90° |
| Installation | As required, preferably with actuator in upright position, screw |
| Protection class | IP66 |
| Power consumption | ＜5W |
3. Product type selection
4. Features
5. Additional software functions
6. Signal flow diagram
Contact Person: Ronald Chen
