|
Product Details:
|
| Electrical Connection: | M12 2-pins B-coded（cable Φ 4-6mm); M12 4-pins D-coded（cable Φ 4-6mm); M12 5-pins A-coded (cable Φ 4-6mm) | Pnuematic Connection: | G1/4 Plug-in Hose Connector (internal Φ6mm) |
|---|---|---|---|
| Ambient Temp: | 0 - 70℃ | Supply Pressure: | 3 - 7 Bar |
| Power Consumption: | ＜5W | Explosion-proof: | Ex NA IIC T4 |
| High Light: | PC digital valve positioner,Feedback digital valve positioner,Autotune digital valve positioner |
||
1. Product Description
1600 series intelligent electro-pneumatic valve positioner is easy to operate and has rich software functions. It can easily be operated via the LCD and keypad.
The product is designed for integral pneumatic control valve, particularly suitable for angle seat valves and diaphragm valves.
Through detecting the position sensor signal, the positioner adjusts the valve position quickly and accurately.
2.Technical Datas
| Material | PC,PA6-GF30,Stainless Steel,SI |
| Power supply | 24V DC ±10% |
| Set-point signal | 0/4-20mA or 0-5/10 V |
| Input resistance for set-point signal | 240Ω at 0/4-20mA, 21KΩ at 0-5/10V |
|
Control medium Dust concentration Particle density Pressure condensation point Oil concentration |
Neutral gases, air DIN ISO 8573-1 Class 5 (<40μm particle size) Class 5 (<10mg/m3) Cass 3 (<-20°C) Class 5 (<25mg/m3) |
| Ambient Temperature | 0-70°C |
| Pneumatic Connection | Plug-in hose connector G1/4(internal Φ6mm) |
| Electrical Connection |
M12 3-pins B-coded(cable ø 4-6mm) M12 4-pins D-coded(cable ø 4-6mm) M12 5-pins A-coded(cable ø 4-6mm) |
| Supply Pressure | 3~7 bar, specific values depending on the actuator |
| Air Flow Rate | 17 L/min, 58 L/min(only single-acting) |
| Stroke Control Range |
Linear 5-50mm Rotary 90° |
| Installation | As required, Preferably with actuator in upright position, Screw. |
| Protection Class | IP65 |
| Power Consumption | <5W |
| Explosion Proof | Ex nA IIC T4 |
3. Product type selection
4. Structure
| 1 | LCD and key panel |
|---|---|
| 2 | Stainless steel body casing |
| 3 | Main body casing |
| 4 | Electrical connection |
| 5 | Pneumatic connection |
| 6 | Actuator connection |
5. Schematic diagram
6. Signal flow diagram
Contact Person: Ronald Chen
