|
Product Details:
|
| Electrical Connection: | M12 2-pins B-coded（cable Φ 4-6mm); M12 4-pins D-coded（cable Φ 4-6mm); M12 5-pins A-coded (cable Φ 4-6mm) | Installation: | As Required, Preferably With Actuator In Upright Position, Screw |
|---|---|---|---|
| Air Flow Rate: | 58 L/min (input Pressure =0.6MPa); 17 L/min (input Pressure =0.6MPa) | Stroke Control Range: | Rotary 0-90°; Linear 5-50mm |
| Supply Pressure: | 3 - 7 Bar | Protection Class: | IP66 |
| High Light: | M12 Control Valve Positioner,IP66 Control Valve Positioner,Single Acting Control Valve Positioner |
||
1. Product Description
POWERFLOW 1600 Series Positioners is extremely easy to install, monitor and control on any type of pneumatic valves with the highest diagnostic level. Mounted on pneumatic actuators for the control of valve internal media. With a complete range of accessories, valves can be wholly equipped and the process can be optimized at its best effeciency.
2.Technical Datas
| Material | PC,PA6-GF30,Stainless Steel,SI |
| Power supply | 24V DC ±10% |
| Set-point signal | 0/4-20mA or 0-5/10 V |
| Input resistance for set-point signal | 240Ω at 0/4-20mA, 21KΩ at 0-5/10V |
|
Control medium Dust concentration Particle density Pressure condensation point Oil concentration |
Neutral gases, air DIN ISO 8573-1 Class 5 (<40μm particle size) Class 5 (<10mg/m3) Cass 3 (<-20°C) Class 5 (<25mg/m3) |
| Ambient Temperature | 0-70°C |
| Pneumatic Connection | Plug-in hose connector G1/4(internal Φ6mm) |
| Electrical Connection |
M12 3-pins B-coded(cable ø 4-6mm) M12 4-pins D-coded(cable ø 4-6mm) M12 5-pins A-coded(cable ø 4-6mm) |
| Supply Pressure | 3~7 bar, specific values depending on the actuator |
| Air Flow Rate | 17 L/min, 58 L/min(only single-acting) |
| Stroke Control Range |
Linear 5-50mm Rotary 90° |
| Installation | As required, Preferably with actuator in upright position, Screw. |
| Protection Class | IP65 |
| Power Consumption | <5W |
| Explosion Proof | Ex nA IIC T4 |
3. Product type selection
4. Features
5. Dimensions
6. Schematic diagram
Contact Person: Ronald Chen
