|
Product Details:
|
| Fluid Pressure: | Max 1.6MPa(232psi) | Control Pressure: | 0.3-0.6MPa(43.5-116psi) |
|---|---|---|---|
| Control Fluid: | Neutral Gas, Air | Body Material: | CF8M/CF8 |
| Seal Material: | PTFE | Actuator Material: | CF8 |
| High Light: | PTFE Pneumatic Angle Seat Valve,Flange Connection Angle Seat Valve,Neutral Gas Angle Seat Valve |
||
1. Description
Valve is closed(open)with spring force, when the piston is actuated by compressed air, valve is open(closed). For the double acting type, the valve is open and closed by compressed air.
2. Technical Data
| Fuild Pressure | Max 1.6MPa(232psi) |
| Control Pressure | 0.3-0.8MPa(43.5-116psi) |
| Control Fluid | Neutral gas, Air |
| Body Material | CF8M/CF8 |
| Seals Material | CF8 |
| Actuator Size | 40mm, 50mm, 63mm, 90mm, 125mm |
| Applicable Fluid | Water, Alcohol, Oil, Fuel, Steam, Neutral gas or liquid, Organic solvent, Acid and lye |
| Fluid Viscosity | Max 600 mm²/s |
| Fluid Temp. | -10-180℃; 25-220℃ |
| Ambient Temp. | -10-80℃ |
| Control Type | Normal-close, Normal-open, Double-acting |
| Connection | Thread(BSP, BSPT, NPT), Welded, Flanged, Tri-clamp |
4. Dimension
| Size |
Actuator (mm) |
Q | A | B | L | C | H | ΦE | n-ΦF | ΦM | ΦN | ΦP | α |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DN15 | 40 | G1/8'' | 135 | 125 | 130 | 2 | 14 | 65 | 4-14 | 16 | 45 | 95 | 45° |
| 50 | 145 | 140 | |||||||||||
| DN20 | 50 | G1/8'' | 165 | 140 | 150 | 2 | 14 | 75 | 4-14 | 19 | 56 | 105 | 45° |
| DN25 | 50 | G1/8'' | 170 | 145 | 160 | 2 | 14 | 85 | 4-14 | 26 | 65 | 115 | 45° |
| 63 | 190 | 175 | |||||||||||
| DN32 | 63 | G1/8'' | 190 | 188 | 180 | 2 | 16 | 100 | 4-18 | 31 | 78 | 140 | 45° |
| 90 | 230 | 235 | |||||||||||
| 90AL | 225 | 234 | |||||||||||
| DN40 | 63 | G1/8'' | 206 | 190 | 200 | 3 | 16 | 110 | 4-18 | 38 | 84 | 150 | 45° |
| 90 | 250 | 240 | |||||||||||
| 90AL | 244 | 235 | |||||||||||
| DN50 | 63 | G1/8 | 235 | 195 | 230 | 3 | 16 | 125 | 4-18 | 49 | 100 | 15 | 45° |
| 90 | 277 | 245 | |||||||||||
| 90AL | 275 | 245 | |||||||||||
| 125AL | G1/4 | 330 | 310 | ||||||||||
| DN65 □ | 90 | G1/8 | 330 | 280 | 290 | 3 | 18 | 145 | 4-18 | 66 | 120 | 185 | 45° |
| 90AL | 325 | 280 | |||||||||||
| 125AL | G1/4 | 375 | 330 | ||||||||||
| DN80 □ | 125AL | G1/4 | 380 | 355 | 310 | 3 | 20 | 160 | 8-18 | 78 | 135 | 200 | 22.5° |
| DN80 | 125AL | G1/4 | 420 | 395 | 350 | 3 | 20 | 180 | 8-18 | 96 | 155 | 215 | 22.5° |
5. Selection
Contact Person: Ronald Chen
