|
Product Details:
|
| Set-point Signal: | 0/4-20mA | Ambient Temp: | 0 - 70℃ |
|---|---|---|---|
| Supply Pressure: | 3 - 7 Bar, Specific Values Depending On The Actuator | Air Flow Rate: | 17 L/min (Sup=0.6MPa) |
| Preotection Class: | IP66 | Power Consumption: | ＜5W |
| High Light: | 17 L/min Linear Valve Positioner,Intelligent Linear Valve positioner,Compact Linear Valve positioner |
||
1. Product Description
The 1880 Series Smart valve positioner receives a 4-20 mA current signal from the controller or control system, converts it into a gas signal through the processor, controls the valve opening, and cooperates with the valve adjustment cone to achieve fast and accurate flow regulation of the valve.
2.Technical Datas
| Material | PC,PA6-GF30,SI |
| Power supply | 24V DC ±10% |
| Set-point signal | 0/4-20mA |
|
Control medium Dust concentration Particle density Pressure condensation point Oil concentration |
Neutral gases, air DIN ISO 8573-1 Class 5 (<40μm particle size) Class 5 (<10mg/m3) Cass 3 (<-20°C) Class 5 (<25mg/m3) |
| Ambient Temperature | 0-70°C |
| Pneumatic Connection | Plug-in hose connector G1/4(internal Φ6mm) |
| Electrical Connection |
M12 3-pins B-coded(cable ø 4-6mm) M12 4-pins D-coded(cable ø 4-6mm) |
| Supply Pressure | 3~7 bar, specific values depending on the actuator |
| Air Flow Rate | 17 L/min |
| Stroke Control Range |
Linear 5-30mm |
| Installation | As required, Preferably with actuator in upright position, Screw. |
| Protection Class | IP66 |
| Power Consumption | <5W |
| Explosion Proof | Ex nA IIC T4 |
3. Product type selection
Remark:
The product is only used for single-acting line stroke actuator. It is suggested to match the actuator of 40-100 mm internal gas chamber diameter.
4. Structure
5. Additional software functions
6. Schematic diagram
Contact Person: Ronald Chen
