|
Product Details:
|
| Valve Body Material: | Stainless Steel 304(CF8)/ 316(CF8M) | Actuator Material: | Plastic/Stainless Steel 304(CF8)/ 316(CF8M) |
|---|---|---|---|
| Seal Material: | PTFE/PPL | Working Pressure: | 16Bar |
| Optional Series: | 2700/2710 | Weight: | Depending On Valve Size |
| High Light: | Weld Connection Angle Seat Valve,Thread Connection Angle Seat Valve,Stainless steel Angle Seat Valve |
||
1. Description
Valve is closed(open)with spring force,when the piston is actuated by compressed air,valve is open(closed).For the double acting type,the valve is open and closed by compressed air.
2. Technical Data
| Fuild Pressure | Max 1.6MPa(232psi) |
| Control Pressure | 0.3-0.8MPa(43.5-116psi) |
| Control Fluid | Neutral gas, Air |
| Body Material | CF8M/CF8 |
| Seals Material | CF8 |
| Actuator Size | 40mm, 50mm, 63mm, 90mm, 125mm |
| Applicable Fluid | Water, Alcohol, Oil, Fuel, Steam, Neutral gas or liquid, Organic solvent, Acid and lye |
| Fluid Viscosity | Max 600 mm²/s |
| Fluid Temp. | -10-180℃; 25-220℃ |
| Ambient Temp. | -10-80℃ |
| Control Type | Normal-close, Normal-open, Double-acting |
| Connection | Thread(BSP, BSPT, NPT), Welded, Flanged, Tri-clamp |
4. Dimension
| Size |
Actuator (mm) |
Q | C | R | K | Thread Connection | Weld Connection | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| G | T | A | L | SW | HA | HL | DIN 11850-2 | DIN 11850-3 | ||||||||
| D | S | D | S | |||||||||||||
| DN10 | 40 | 1/8'' | 50.5 | 27 | 112 | 3/8'' | 12 | 124 | 68 | 27 | - | - | - | - | - | - |
| 50 | 1/8'' | 60 | 33 | 125 | 135 | - | - | - | - | - | - | |||||
| DN15 | 40 | 1/8'' | 50.5 | 27 | 112 | 1/2'' | 15 | 124 | 68 | 27 | 118 | 70 | 19 | 1.5 | 20 | 2 |
| 50 | 1/8'' | 60 | 33 | 125 | 135 | 128 | ||||||||||
| DN20 | 50 | 1/8'' | 60 | 33 | 132 | 3/4'' | 16 | 140 | 75 | 32 | 135 | 82 | 23 | 1.5 | 24 | 2 |
| DN25 | 50 | 1/8'' | 60 | 33 | 136 | 1'' | 17 | 150 | 90 | 40 | 150 | 100 | 29 | 1.5 | 30 | 2 |
| 63 | 1/8'' | 75 | 41 | 162 | 172 | 175 | ||||||||||
| 90AL | 1/8'' | 112 | 57 | 210 | 215 | 216 | ||||||||||
| 90 | 1/8'' | 106 | 55 | 211 | 216 | 218 | ||||||||||
| DN32 | 63 | 1/8'' | 75 | 41 | 174 | 1 1/4'' | 21 | 190 | 116 | 50 | 186 | 125 | 35 | 1.5 | 36 | 2 |
| 90AL | 1/8'' | 112 | 57 | 220 | 230 | 230 | ||||||||||
| 90 | 1/8'' | 106 | 55 | 223 | 235 | 232 | ||||||||||
| DN40 | 63 | 1/8'' | 75 | 41 | 175 | 2'' | 22 | 190 | 116 | 56 | 190 | 130 | 41 | 1.5 | 42 | 2 |
| 90AL | 1/8'' | 112 | 57 | 220 | 230 | 232 | ||||||||||
| 90 | 1/8'' | 106 | 55 | 223 | 235 | 235 | ||||||||||
| DN50 | 63 | 1/8'' | 75 | 41 | 183 | 2'' | 22 | 205 | 138 | 69 | 206 | 155 | 53 | 1.5 | 54 | 2 |
| 90AL | 1/8'' | 112 | 57 | 232 | 245 | 247 | ||||||||||
| 90 | 1/8'' | 106 | 55 | 232 | 250 | 250 | ||||||||||
| 125AL | 1/4'' | 170 | 85 | 300 | 305 | 307 | ||||||||||
| DN65 | 90AL | 1/8'' | 112 | 57 | 262 | 2 1/2'' | 26 | 282 | 178 | 85 | 320 | 270 | 70 | 2 | - | - |
| 90 | 1/8'' | 106 | 55 | 265 | 185 | 325 | - | - | ||||||||
| 125AL | 1/4'' | 170 | 85 | 315 | 327 | 365 | - | - | ||||||||
| DN65 □ | 90AL | 1/8'' | 112 | 57 | 280 | 270 | 315 | 270 | 70 | 2 | - | - | ||||
| 90 | 1/8'' | 106 | 55 | 280 | 275 | 320 | - | - | ||||||||
| 125AL | 1/4'' | 170 | 85 | 330 | 320 | 360 | - | - | ||||||||
| DN80 □ | 125AL | 1/4'' | 170 | 85 | 355 | 3'' | 27 | 340 | 210 | 100 | 360 | 284 | 85 | 2 | - | - |
| DN80 | 125AL | 1/4'' | 170 | 85 | 327 | 380 | 370 | 284 | 85 | 2 | - | - | ||||
3. Selection
Contact Person: Ronald Chen
