|
Product Details:
|
| Ambient Temp: | 0 - 70℃ | Power Consumption: | ＜5W |
|---|---|---|---|
| Supply Pressure: | 3 - 7 Bar, Specific Values Depending On The Actuator | Air Flow Rate: | 17 L/min (Sup=0.6MPa); 58 L/min (Sup=0.6MPa) |
| Stroke Control Range: | Linear 5-50mm; Rotary 90° | Input Resistance For Set-point Signal: | 120Ω |
| High Light: | IP67 Pneumatic Valve Positioner,Electro Pneumatic Valve Positioner,17 L/min Pneumatic Valve Positioner |
||
1. Product description
1500 Series Thread Mounted Electro-pneumatic Valve positioner is used for operation of pneumatic valve actuators by means of electrical controller or control system with an analog output signal of DC 4 to 20mA.
2. Technical Data
| Material | PC,PA6-GF30,SI |
| Power supply | 24V DC ±10% |
| Set-point signal | 4 - 20 mA |
| Input resistance for set-point signal | 120Ω |
| Ambient temperature | 0 - 70° |
| Pneumatic connection | Plug-in hose connector G1/4 (internal Φ6mm) |
| Electrical connection | M12 3-pins B-code (cable Φ 4-6mm); M12 4-pins D-code (cable Φ4-6mm) |
| Supply pressure | 3-7 bar, specific values depending on the actuator |
| Air flow rate | 17 L/min (Sup=0.6MPa); 58L/min (Sup=0.6MPa) |
| Stroke control range | Linear 5-50mm; Rotary 90° |
| Installation | As required, preferably with actuator in upright position, screw |
| Protection class | IP66 |
| Power consumption | ＜5W |
3. Product type selection
4. Features
5. Dimensions
6. Signal flow diagram
Contact Person: Ronald Chen
